During the production operation, you may encounter the situation that the left and right distributors of the paver do not work. This may be due to problems with the circuit or mechanical transmission. Of course, it may also be a problem with the hydraulic system or the oil filter. caused by. So are there any other problems that cause it not to work? Let's take a look!

　　(1) The bearings at both ends of the paver accessory screw distributor are damaged. After running for a long time, the paver accessories are worn to varying degrees, and the bearings are easily broken due to transmission obstruction. Therefore, it is necessary to always pay attention to the use of the bearing, replace the relevant parts of the bearing in time when there is a problem, and inject new lubricating oil in order to continue to use it.

　　(2) The chain of the paver accessories does not match the accessories, and it is too long. As power transmission, the chain will continue to be stretched during long-term use. When it exceeds a certain length, the chain will be stuck in the sprocket box.