Discussion on Construction Technology of Roadside Sliding Form

In order to ensure the continuous operation of the roadside stone slipform machine, a JS300 forced mixer and two tractors are equipped to make the back field and front field continuous. In order to make the rainwater outlet of the expansion joint, it is equipped with a cement concrete cutting machine, a gold steel bench drill, a slotting tool, two steel trowels, and a sharp trowel.

Significance of curb slipform machine to highway development

The function of the concrete curb slipform machine is to replace the traditional pouring construction methods of cement structures such as curbs, drainage ditches, and anti-collision walls, so as to liberate manpower, improve construction quality and increase work efficiency. As long as the on-site cooperation is good, the curb slipform machine can work 24 hours a day, and because the curb slipform machine is a fully automatic self-propelled device, there will be no driver fatigue.

What is the reason for the overheating of the hydraulic system of the slipform paver

The construction of slipform paver is currently in the stage of technological upgrading. It belongs to the sunrise industry, and the return on investment is still very good. However, we must pay attention to the correct use of the machine during the construction process, and we can find and deal with problems in time. For example, what is the reason for the high temperature of the hydraulic system? How to eliminate it?

Comparison of curb slipform technology and prefabrication technology

The traditional curb prefabrication process roughly requires the following procedures: purchase a large number of curb molds - find a site for a large number of prefabricated curb stones - ship curb stones from the prefabricated site to the construction site - on-site unloading, installation, and groove joints. There will also be bumps and damage to curbstones during the process. The installation efficiency is only about 500-600 meters per day.