img语言选择
中文简体
English
News & Events
Location:
Homepage
/
Slipform machine FAQ
All Categories
Latest News
Siming Report
Industry News
Company Announcement
Causes

Causes and Elimination of Common Faults in Hydraulic System of Paver

The failure of hydraulic system is often the result of the comprehensive influence of many factors, so before analyzing the failure, it is necessary to understand the principle and characteristics of the entire hydraulic system, and then judge according to the failure phenomenon. There are both missing parts and testing instruments on the construction site. There are some tricks to find the cause of the fault. The most common method is to reverse the component and remove the load. If the component is reversed and the fault is also reversed, it proves that the component has a problem; load, the fault disappears, and the problem is understood.
2022-09-15
Routine

Routine care and maintenance of paver

For the tensioning device in the transmission system, especially in the transmission system of the mixer driven by the chain, regular tightening and maintenance should be done to prevent the tensioning device from failing and damaging the equipment.
2022-09-15
What

What should I do if the paver distributor does not work?

During the production operation, you may encounter the situation that the left and right distributors of the paver do not work. This may be due to problems with the circuit or mechanical transmission. Of course, it may also be a problem with the hydraulic system or the oil filter. caused by. So are there any other problems that cause it not to work? Let's take a look!
2022-09-15
How

How to troubleshoot the heating of the paver hydraulic system? Where to start?

The oil temperature in the hydraulic system of the paver suddenly appears too high. How to deal with this? It should be convenient to check from there. Interested friends, let’s find out together!
2022-09-15
Three

Three common faults of paver

The speed of wear is related to the mix ratio of concrete. After wear to a certain limit, if it is not replaced and continues to be used, it will suddenly break. The break often occurs during construction. After the break, the cement slurry enters the inner cavity of the eccentric block, often causing vibration The internal components of the rod, such as bearings, hydraulic motors, etc., are damaged. In addition, the strength of the concrete will be affected if the vibrating rod does not vibrate during construction. If the machine is shut down for replacement, it will take a period of time, which seriously affects the smooth operation of all aspects of slipform construction. Expected replacement and Equipped with a vibrating rod, it can not only ensure the paving quality of the road surface, but also improve the working efficiency of the machine.
2022-09-14
Previous page
1

Contact us

Service Hotline: 400-828-3588

Fax: +86-514-88221112

Address: No. 218 Jinwan Road, Baoying Economic Development Zone, Jiangsu Province

Website Map  |  Contact  |  Legal Notice. | Business license

Copyright:Jiangsu Siming Construction Machinery Co., Ltd

Verification 苏ICP备10012480号-1
搜索
GO