语言选择
SMC-3200 Trench Slipform Paver
SMC-3200 cement concrete slipform paver is a slipform construction equipment independently developed by our company for small and medium-sized concrete structures. Compared with the traditional prefabrication process and fixed mold cast-in-place process, the sliding form process using this type of machine has the advantages of fast construction speed, high efficiency and good quality.
The machine has strong engine power, full electronic control, full hydraulic drive, two crawler drives, and is equipped with an automatic steering and leveling control system. It can complete the vibration compaction, paving, forming and other processes of cement concrete structures at one time.
According to different construction conditions, the walking mode of SMC-3200 cement concrete slipform paver can be divided into two modes: two crawler drive and four-wheel driven walking or single crawler drive and four-wheel driven walking. If the conditions of the roadbed on both sides permit, two crawlers can be installed on the front side of the paver to walk on the roadbed; Side embankment walking.
SMC-3200 cement concrete slipform paving meets container transportation conditions. When transporting, change the two crawler belts on the front side of the paver to single crawler belt, and move the installation position of the rear column inward.
features
|
power system · Equipped with a water-cooled engine, the power is strong and the work is reliable. ·Equipped with a large-size radiator, the heat dissipation effect is remarkable. Hydraulic system ·Load sensitive hydraulic system, DANFOSS brand. ·The oil inlet and outlet of the pump are equipped with high-precision filters with a maximum filtration accuracy of 10um. Electrical control system ·Color graphic display on the console display, which integrates fault diagnosis, status display, prompt alarm light functions, ·Steering, longitudinal slope and transverse slope are electronically controlled automatically, and the sensor and controller adopt CAN bus communication. ·Standard piping has 2 longitudinal slope sensors, 1 lateral slope sensor and 1 steering sensor.
|
flushing system ·The pressure of the high-pressure flushing system can be set according to the needs, and the conventional pressure is set to 5MPA, which meets the flushing requirements. Feeding system ·Use cement mixer truck or excavator to directly discharge the material into the hopper. Vibration compaction system ·U.S. imported vibrator, square shell, hydraulic drive. ·The standard configuration is 2 vibrating rods, 6 vibrating oil circuits, and the frequency of 0~167Hz is steplessly adjustable. walking system ·Consists of variable pump, hydraulic valve, hydraulic motor, reducer, crawler belt and control system ·Two-track drive and four-wheel driven walking, the walking speed is steplessly adjustable. |
Technical Parameters
|
project
|
parameter
|
|
walking parameters
|
|
|
paving speed
|
0~11.6 m/min
|
|
Driving speed
|
0~1.2 km/h
|
|
Climbing ability (working state)
|
20%
|
|
Flatness
|
3mm/3m
|
|
Track Steering Angle
|
36°
|
|
engine parameters
|
|
|
manufacturer
|
Weichai
|
|
model
|
WP3.2G
|
|
Calibration power
|
36.8kW/2500rpm
|
|
Displacement
|
3.17 L
|
|
Number of cylinders
|
4 cylinders
|
|
cooling method
|
water cooling
|
|
Emission Standards
|
Three-stage GB20891-2014
|
|
Electrical System Parameters
|
|
|
power supply
|
12 V
|
|
UI
|
color display
|
|
operation control
|
integrated control
|
|
control bus
|
CAN
|
|
Three boxes volume
|
|
|
Fuel tank
|
190L
|
|
Hydraulic tank
|
200L
|
|
water tank
|
600 L
|
|
Basic Paving Parameters
|
|
|
The maximum paving width of the ditch
|
2100mm
|
|
The maximum paving depth of the ditch
|
850mm
|
|
Pavement maximum paving width
|
2000mm
|
|
Pavement Maximum Paving Thickness
|
200mm
|
|
Maximum working capacity
|
50m3/h
|
|
Total Weight
|
6t
|
|
Vibrator interface and performance parameters
|
|
|
Number of ports
|
6
|
|
vibrator form
|
Hydraulic Straight Vibrator
|
|
Adjustment method
|
Manual scaling
|
|
vibration frequency
|
0~167 Hz
|
|
ride height adjustment
|
|
|
hydraulic height adjustment
|
900mm
|
|
mechanical height adjustment
|
230mm
|
|
Overall Dimensions (Transportation/Working)
|
|
|
total length
|
4450 mm/4450 mm
|
|
total width
|
2720 mm/(road 2430mm, container 1900mm)
|
|
Total height
|
3400mm/(road 2200mm, container 2200mm)
|
Dimension unit: mm
Note: Please consult Siming Company for specific construction conditions.
Related cases
Similar products
Similar products
1. Highway and municipal road construction: curbs, central isolation belts, crash barriers, slope protection, drainage ditches, cement pavement, etc.
2. Railway construction: retaining walls, drainage ditches, etc.
3. Agriculture and water conservancy construction: anti-seepage canals, slope protection and road hardening, etc.
Consult now
Consult now
Contact us
Service Hotline: 400-828-3588
Phone: +86-514-88980000
Website: www.siminggroup.com
Email: sales@simingcn.com
Message
sales@simingcn.com
Hotline:400-828-3588 
Website Map | Contact | Legal Notice. | Business license
Copyright:Jiangsu Siming Construction Machinery Co., Ltd
