语言选择
SMC-1200 Truss Bridge Deck Leveling Machine
Structural features
(1) The optimized truss structure can realize large-span assembly, has high mechanical strength, is not easy to deform, ensures the integrity of the entire cast-in-place layer, avoids longitudinal joints and elevation differences in staged paving, effectively guarantees construction quality, and effectively improves construction efficiency.
(2) The modular assembly mode of the truss of the whole machine, the roller shaft adopts split compound connection, which is convenient for installation, and can be expanded and combined with different widths, which is convenient to adapt to the use of bridge decks of different widths and improves the utilization rate of equipment.
(3) This equipment uses a tire walking mechanism to directly walk on the steel mesh of the bridge deck. If the local unevenness is not smooth, the hydraulic cylinder is controlled by a high-precision digital leveling instrument to adjust the elevation. In the case that the guardrail has been laid, the hanging structure can be selected on both sides, which can be supported to walk on the guardrail;
(4) Two vibrating rollers have the functions of leveling and pulp extraction, and the height and inclination of the rollers can be adjusted up and down. At the same time, the shock pad handwheel can be adjusted arbitrarily to realize the adjustment of the transverse slope of the bridge deck.
(5) The unique steering deviation correction design is adopted, which can easily realize that the driving direction is consistent with the template.
(6) There is a rear-mounted widening pallet at the rear of the tire to make up for the lack of width when the tire is walking on the base and directly constructing.
(7) The operation and construction are simple, and the requirements for the technical quality of the operators are not high, and it is easy to get started with short-term training. Fewer people need assistance, low labor intensity, significantly improve work efficiency, save labor and time, save project cost, and improve construction quality.
(8) The safety covering design of the traveling wheels can ensure the safety of construction personnel at the edges on both sides.
(9) Equipped with a flushing system, which is convenient for daily maintenance.
(10) Provide lights to solve lighting problems for night and tunnel construction.
Features
(11) The whole machine adopts high-frequency vibration push plate to push the material, which can keep the concrete in a light and flowing state, and the material level is uniform.
(12) Efficient vibration design can effectively ensure the compactness of concrete. For low slump concrete, it can also achieve certain ideal compaction and leveling effects.
(13) Large-diameter high-speed rollers are adopted, with long wear-resisting life, smooth transverse end surface, good linearity and pulp extraction effect.
(14) The correction wheel can be finely adjusted, and the handle only turns one circle, and the drop is only 1mm.
(15) High-horsepower output can easily maintain a high-speed and stable paving state, which is conducive to ensuring construction quality and improving construction efficiency.
(16) The two sides are respectively controlled by digital technology, and a large cylinder is used for hydraulic lifting to press the material. The display screen of the controller can display operation instructions in Chinese and English. Automatic and precise control. Digital ultrasonic sensors can also be used to sense the position of steel wire or cotton wire without contact. It can also be equipped with laser technology for leveling, with automatic positioning.
(17) It is equipped with artificial pedals at random, which is convenient for manual dough collection.
Technical Parameters
|
project name |
parameter |
illustrate |
|
Paving width (m) |
11.50~11.85 |
According to customer customization |
|
Optimum Paving Thickness (cm) |
10~18 |
|
|
Paving slope (i) |
±15% |
|
|
Paving speed (m/min) |
0~4.8 |
|
|
Thickness error range (mm) |
±5 |
|
|
Flatness accuracy range (mm) |
±2 |
|
|
Cross slope accuracy range (%) |
±0.15 |
|
|
way of walking |
Four wheel drive tire walking |
|
|
Switch cabinet rated voltage (V) |
220/380 |
|
|
Rated total power (kw) |
≥28.8 |
|
|
Walking drive motor power (kw, quantity) |
1.5*4 |
|
|
Roller drive motor power (kw, quantity) |
7.5*2 |
|
|
Power of vibrating push plate (kw, quantity) |
0.16*6 |
|
|
Power of hydraulic pump station (kw) |
4 |
|
|
Cleaning machine power (kw, quantity) |
1.8 |
|
|
Roller diameter (mm) |
219 |
|
|
Roller wall thickness (mm) |
8 |
|
|
Roller maximum speed (rpm) |
260 |
|
|
Truss body size (length, width and height m) |
11.5*0.85*1.25 |
|
|
Truss square steel thickness (mm) |
3.6 |
|
|
Rear carriage width (cm, quantity) |
60*2 |
According to customer customization |
|
Leveling controller display mode |
LCD Chinese |
|
|
leveling control |
automaticdigitaldouble-slope |
|
|
Walking tire size (diameter width cm) |
28/15 |
|
|
steering control |
electronically controlled differential |
|
|
Host size (length, width and height m) |
12*2.4*2.2 |
|
|
Machine weight (kg) |
≥4000KG |
Weight at 12 meters |
product configuration
|
serial number |
name |
unit |
quantity |
Remark |
|
1 |
Slipform machine |
tower |
1 |
bare metal |
|
2 |
operating platform |
set |
1 |
|
|
3 |
Electric box assembly |
set |
1 |
|
|
4 |
truss |
set |
1 |
11.5*0.85*1.25 |
|
5 |
Four-wheel drive device |
set |
2 |
|
|
6 |
solid tire |
Only |
4 |
28/15 |
|
7 |
Cycloid reducer |
tower |
4 |
XWD-3 |
|
8 |
high frequency vibrator |
Only |
2 |
DY-300/3 |
|
9 |
High frequency vibrating push plate |
set |
1 |
|
|
10 |
roller |
root |
2 |
f219 |
|
11 |
auxiliary vibrating plate |
set |
2 |
with vibrator |
|
12 |
Hydraulic power station |
set |
1 |
|
|
13 |
hydraulic cylinder |
set |
2 |
|
|
14 |
High Pressure Washing Pump |
set |
1 |
|
|
15 |
motor |
tower |
2 |
B3-7.5-4 |
|
16 |
motor |
tower |
1 |
B3-4-4 |
|
17 |
motor |
tower |
4 |
B3-1.5-4 |
|
18 |
flashlight |
Only |
6 |
|
|
19 |
Automatic leveling system |
set |
1 |
double slope |
Similar products
Similar products
1. Highway and municipal road construction: curbs, central isolation belts, crash barriers, slope protection, drainage ditches, cement pavement, etc.
2. Railway construction: retaining walls, drainage ditches, etc.
3. Agriculture and water conservancy construction: anti-seepage canals, slope protection and road hardening, etc.
Consult now
Consult now
Contact us
Service Hotline: 400-828-3588
Phone: +86-514-88980000
Website: www.siminggroup.com
Email: sales@simingcn.com
Message
sales@simingcn.com
Hotline:400-828-3588 
Website Map | Contact | Legal Notice. | Business license
Copyright:Jiangsu Siming Construction Machinery Co., Ltd
