400-828-3588

语言选择

中文简体

English

Success cases

Location:

Homepage

Homepage product rolling recommendation

SMC-8428 Ultrasonic Boot Balance Beam

The SMC-8428 produced by Jiangsu Siming is a general-purpose construction machine control system. The sensor is widely used in the detection of height and slope, and its operation is simple and reliable. Widely used in concrete paver, asphalt paver, milling machine and other equipment. SMC-8428 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology.

零售价

0.0

Yuan

市场价

0.0

Yuan

浏览量:

1000

产品编号

Category

Homepage product rolling recommendation

数量

库存:

keyword:

SMC-8428 Ultrasonic Boot Balance Beam



产品介绍

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[产品参数, 参数]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Technical Parameter

Production configuration

Related images

Chinese controller features

1. It adopts digital control mode, and forms a control network with sensors through the CAN bus protocol. It can be compatible with various CAN digital sensors on the paver, such as longitudinal slope, transverse slope, etc., and has strong scalability.

2. The LCD screen displays real-time data, and all operation interfaces are in Chinese or graphical prompts, making it easier to master and more convenient to use.

3. The system has a self-diagnosis function, and the faults of the system are clear at a glance on the display screen.

4. It is completely interchangeable and universal with the same type of imported brand products, and can be used for paver, milling machine, grader and other equipment.

Ultrasonic Sensor Features

Ultrasonic sensors: 6 in total. They all use original imported military-grade high-power probes, which can be exchanged at will. The installation height is 35 cm from the ground, and the last one is about 50 cm from the newly paved asphalt surface.

1. The ultrasonic slipper sensor consists of 6 ultrasonic probes, including 5 test probes and 1 environmental compensation probe, with a large detection surface;

2. It is used on the balance beam to increase the amount of test data. The five independent probes of the sensor work at the same time, and only three data close to the actual detection value will be used, so as to obtain the average value and make the road smoother;

3. It completely replaces the G176 contact slope gauge to detect the steel wire or curb benchmark, so that the leveling system can eliminate the influence of steel wire vibration and sliding rod drop on the smoothness of the road surface.

Technical Parameters

Output mode: NPN, PNP

Output waveform: PWM pulse wave

Output frequency: 2Hz

Output current: 1.5A

Short circuit protection current: 2.2A

Control load type: switch valve

Sensor measurement accuracy: 2mm

Sensor measuring range: 19-100cm

Temperature rise 40° Working deviation: 0-3mm

Working temperature: -10-+70℃

Storage temperature: -25-+85℃

Voltage range: DC11——30V

The function of each pin of the socket: A ground wire, B power supply (+24V), C rise, D fall

Product configuration:

serial number	name	unit	quantity	Remark
1	boot controller	Only	2
2	boot sensor	Only	6
3	Junction Box	Only	2
4	power cable	root	2	2m spiral wire black
5	Junction box wire	root	2	2m helix yellow
6	sensor line	root	6	Black spiral wire 2 meters 4, 1.3 meters 2
7	handle	Only	6
8	Main controller mounting plate	indivual	2
9	Junction Box Activity Card	indivual	2
10	Long hanging rod positioning card	Only	6	M10×150 screws, 6 pieces (including flat spring washer nuts)
11	Locating ring	Only	8	Contains 6 M10×150 screws
12	U-shaped sensor mounting card	set	6	With wing nut
13	Card beam device	Only	4	M10×90 screws and nuts, 4 pieces (including flat elastic pads)
14	hanging rod	root	6	Contains 6 U-shaped cards
15	Aluminum alloy beam/stainless steel beam	Bag	4	M10×35 screws, 16 pieces (including spring washers); M10×50 screws, 8 pieces (including flat spring washers)
16	Stainless Steel Inner Bracket	Bag	2	M10×40 screws, 8 pieces (including nuts)
17	Stainless steel outer bracket	Bag	2	M10×40 screws, 8 pieces (including nuts)
18	Standard Parts	Bag	1
19	cable tie	root	20
20	active splint			Configure according to customer needs
twenty one	welding plate			Configure according to customer needs
twenty two	tool	set	1	Including utility knife, 1 17-19 solid wrench, 1 16-18 solid wrench, 1 16-18 torx wrench, 1 17-19 torx wrench, 1 12-inch adjustable wrench
twenty three	material	share	1	Including 1 instruction manual, 2 labels, 1 identification certificate, 1 shipping list, and 1 user opinion survey form