语言选择
SMC-8428 Ultrasonic Boot Balance Beam
The SMC-8428 produced by Jiangsu Siming is a general-purpose construction machine control system. The sensor is widely used in the detection of height and slope, and its operation is simple and reliable. Widely used in concrete paver, asphalt paver, milling machine and other equipment. SMC-8428 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology.
Chinese controller features
1. It adopts digital control mode, and forms a control network with sensors through the CAN bus protocol. It can be compatible with various CAN digital sensors on the paver, such as longitudinal slope, transverse slope, etc., and has strong scalability.
2. The LCD screen displays real-time data, and all operation interfaces are in Chinese or graphical prompts, making it easier to master and more convenient to use.
3. The system has a self-diagnosis function, and the faults of the system are clear at a glance on the display screen.
4. It is completely interchangeable and universal with the same type of imported brand products, and can be used for paver, milling machine, grader and other equipment.
Ultrasonic Sensor Features
Ultrasonic sensors: 6 in total. They all use original imported military-grade high-power probes, which can be exchanged at will. The installation height is 35 cm from the ground, and the last one is about 50 cm from the newly paved asphalt surface.
1. The ultrasonic slipper sensor consists of 6 ultrasonic probes, including 5 test probes and 1 environmental compensation probe, with a large detection surface;
2. It is used on the balance beam to increase the amount of test data. The five independent probes of the sensor work at the same time, and only three data close to the actual detection value will be used, so as to obtain the average value and make the road smoother;
3. It completely replaces the G176 contact slope gauge to detect the steel wire or curb benchmark, so that the leveling system can eliminate the influence of steel wire vibration and sliding rod drop on the smoothness of the road surface.
Technical Parameters
Output mode: NPN, PNP
Output waveform: PWM pulse wave
Output frequency: 2Hz
Output current: 1.5A
Short circuit protection current: 2.2A
Control load type: switch valve
Sensor measurement accuracy: 2mm
Sensor measuring range: 19-100cm
Temperature rise 40° Working deviation: 0-3mm
Working temperature: -10-+70℃
Storage temperature: -25-+85℃
Voltage range: DC11——30V
The function of each pin of the socket: A ground wire, B power supply (+24V), C rise, D fall
Product configuration:
|
serial number |
name |
unit |
quantity |
Remark |
|
1 |
boot controller |
Only |
2 |
|
|
2 |
boot sensor |
Only |
6 |
|
|
3 |
Junction Box |
Only |
2 |
|
|
4 |
power cable |
root |
2 |
2m spiral wire black |
|
5 |
Junction box wire |
root |
2 |
2m helix yellow |
|
6 |
sensor line |
root |
6 |
Black spiral wire 2 meters 4, 1.3 meters 2 |
|
7 |
handle |
Only |
6 |
|
|
8 |
Main controller mounting plate |
indivual |
2 |
|
|
9 |
Junction Box Activity Card |
indivual |
2 |
|
|
10 |
Long hanging rod positioning card |
Only |
6 |
M10×150 screws, 6 pieces (including flat spring washer nuts) |
|
11 |
Locating ring |
Only |
8 |
Contains 6 M10×150 screws |
|
12 |
U-shaped sensor mounting card |
set |
6 |
With wing nut |
|
13 |
Card beam device |
Only |
4 |
M10×90 screws and nuts, 4 pieces (including flat elastic pads) |
|
14 |
hanging rod |
root |
6 |
Contains 6 U-shaped cards |
|
15 |
Aluminum alloy beam/stainless steel beam |
Bag |
4 |
M10×35 screws, 16 pieces (including spring washers); |
|
16 |
Stainless Steel Inner Bracket |
Bag |
2 |
M10×40 screws, 8 pieces (including nuts) |
|
17 |
Stainless steel outer bracket |
Bag |
2 |
M10×40 screws, 8 pieces (including nuts) |
|
18 |
Standard Parts |
Bag |
1 |
|
|
19 |
cable tie |
root |
20 |
|
|
20 |
active splint |
|
|
Configure according to customer needs |
|
21 |
welding plate |
|
|
Configure according to customer needs |
|
22 |
tool |
set |
1 |
Including utility knife, 1 17-19 solid wrench, 1 16-18 solid wrench, 1 16-18 torx wrench, 1 17-19 torx wrench, 1 12-inch adjustable wrench |
|
23 |
material |
share |
1 |
Including 1 instruction manual, 2 labels, 1 identification certificate, 1 shipping list, and 1 user opinion survey form |
Related cases
Similar products
Similar products
1. Highway and municipal road construction: curbs, central isolation belts, crash barriers, slope protection, drainage ditches, cement pavement, etc.
2. Railway construction: retaining walls, drainage ditches, etc.
3. Agriculture and water conservancy construction: anti-seepage canals, slope protection and road hardening, etc.
Consult now
Consult now
Contact us
Service Hotline: 400-828-3588
Phone: +86-514-88980000
Website: www.siminggroup.com
Email: sales@simingcn.com
Message
sales@simingcn.com
Hotline:400-828-3588 
Website Map | Contact | Legal Notice. | Business license
Copyright:Jiangsu Siming Construction Machinery Co., Ltd
