语言选择
SMC-8018 Ultrasonic Balance Beam
Usage conditions:
The SMC-8018 produced by Jiangsu Siming is a general-purpose construction machine control system. The front section of the unilateral balance beam uses 3 single-probe sensors, and the rear section uses a 6-probe shoe sensor. The shoe sensor can be used for height detection, and its operation is simple and reliable. SMC-8018 is a flexible and efficient control system. Its operating system is based on advanced micro-processing technology and adopts CAN bus technology. It is suitable for all kinds of imported and domestic brand pavers, and is used for automatic leveling control in the construction of supporting pavers.
Functions and Features:
1. Upgraded products based on 8008;
2. The controller is connected with 3 single-probe sensors and a boot-type sensor. It has the characteristics of 8008 simple design, convenient and flexible operation, and affordable price. The shoe-type sensor improves the measurement accuracy and anti-interference ability.
Chinese controller:
It adopts digital control mode and forms a control network with sensors through the CAN bus protocol, which has strong scalability.
The system has a self-diagnosis function, and the system faults are clear at a glance on the display screen.
Select different control modes according to the working conditions, so that the system can adapt to the working conditions to achieve the optimal control effect, and the equivalent beam length can be adjusted.
Real-time data on the LCD screen, all operation interfaces are in Chinese or graphic prompts, making it easier to master and more convenient to use.
Ultrasonic sensor features:
High-quality high-power probes are used.
Use CAN bus bus system to exchange data with the controller.
Unique shape and structure for easy maintenance and repair
The compensation rod of the sensor and the internally set temperature compensation can work independently or simultaneously.
All sensors are interchangeable.
The shoe sensor is composed of 6 ultrasonic probes. The 5 independent probes of the sensor work at the same time. Only 3 data close to the actual detection value will be used to obtain the average value.
The shoe sensor can replace the inclinometer walking curb, steel wire or cotton thread, no mechanical wear, no sticky material.
Technical Parameters:
Working voltage: 10V~30V
Communication type: CANbus
Controller output current: 5A
Controller output type: NPN, PNP
Output frequency: 3HZ
Ultrasonic detection range: 25cm~100cm
Resolution: 0.2mm
Ultrasonic probe frequency: 200KHZ
Working temperature: -20~85℃
Product configuration:
|
serial number |
name |
unit |
quantity |
Remark |
|
1 |
8008 master controller |
Only |
2 |
|
|
2 |
8008 sensor |
Only |
6 |
|
|
3 |
8428 sensor |
Only |
2 |
|
|
4 |
8008 junction box |
Only |
2 |
|
|
5 |
8008 sensor temperature compensation rod |
indivual |
6 |
|
|
6 |
8008 power cord |
root |
2 |
2m spiral wire black |
|
7 |
8008 junction box wire |
root |
2 |
2m helix yellow |
|
8 |
8008 sensor line |
root |
8 |
Black spiral wire 2 meters 4, 1.3 meters 2 |
|
9 |
handle |
Only |
8 |
|
|
10 |
Main controller mounting plate |
indivual |
2 |
M10×150 screws, 2 pieces (including flat spring washer nuts) |
|
11 |
Junction Box Activity Card |
indivual |
2 |
M10×150 screws, 2 pieces (including flat spring washer nuts) |
|
12 |
hanging rod activity card |
Only |
8 |
M10×150 screws, 8 pieces (including flat spring washer nuts) |
|
13 |
Locating ring |
Only |
12 |
Contains 16 pieces of M10×25 screws |
|
14 |
U-shaped sensor mounting card |
set |
6 |
M8 stainless steel wing nuts, 16 pcs, M8 anti-loosening nuts, 16 pcs |
|
15 |
Card beam device |
Only |
4 |
M10×90 screws and nuts, 4 pieces (including flat elastic pads) |
|
16 |
hanging rod |
root |
8 |
|
|
17 |
Aluminum alloy beam/stainless steel beam |
Bag |
4 |
M10×35 screws, 16 pieces (including spring washers); |
|
18 |
Stainless Steel Inner Bracket |
Bag |
2 |
M10×40 screws, 8 pieces (including nuts) |
|
19 |
Stainless steel outer bracket |
Bag |
2 |
M10×40 screws, 16 pieces (including nuts) |
|
20 |
Bracket connection round pipe |
root |
4 |
|
|
21 |
stuck |
Only |
8 |
M12×75 screws, 16 pieces (including flat elastic pads) |
|
22 |
Standard Parts |
Bag |
1 |
|
|
23 |
cable tie |
root |
20 |
|
|
24 |
active splint |
|
|
Configure according to customer needs |
|
25 |
welding plate |
|
|
Configure according to customer needs |
|
26 |
tool |
set |
1 |
Including utility knife, 1 17-19 solid wrench, 1 16-18 solid wrench, 1 16-18 torx wrench, 1 17-19 torx wrench, 1 12-inch adjustable wrench |
|
27 |
material |
share |
1 |
Including 1 instruction manual, 2 labels, 1 identification certificate, 1 shipping list, and 1 user opinion survey form |
Related images:
Data collation
Similar products
Similar products
1. Highway and municipal road construction: curbs, central isolation belts, crash barriers, slope protection, drainage ditches, cement pavement, etc.
2. Railway construction: retaining walls, drainage ditches, etc.
3. Agriculture and water conservancy construction: anti-seepage canals, slope protection and road hardening, etc.
Consult now
Consult now
Contact us
Service Hotline: 400-828-3588
Phone: +86-514-88980000
Website: www.siminggroup.com
Email: sales@simingcn.com
Message
sales@simingcn.com
Hotline:400-828-3588 
Website Map | Contact | Legal Notice. | Business license
Copyright:Jiangsu Siming Construction Machinery Co., Ltd
